Guest Post {two sided message-recipe holder-chalkboard}

 

guest post banner 1

 

DIY memo standsHi! My name is Mindi and I am a new blogger over at MyLove2Create. I can’t even describe how thrilled I am to be guest posting on Gail’s amazing blog. She is my hero! I have been inspired by her many projects and want to “grow up” to be just like her!

Today I want to share a project I made last spring for all my kids teachers. What you can’t see in the photo is that on the other side is a chalkboard. All the teachers LOVED them and I spent less than $5 total! That money was spent on buying the clips, everything else I had on hand or repurposed!

I loved it so much that I decided to make one for my kitchen as well, and it has been very useful!  I use it as a message board for my family and as a recipe holder while I am cooking, but the uses are endless.

DIY message center
So lets get started…

Beware…I love picture tutorials so this post has a lot of pictures!

Early last spring I had picked up an old crib off the side of the road and it was the inspiration….what could I make from this?  Well I did need to make gifts for my kids teachers…So, with some wood scraps and crib parts, this is what I came up with.

FYI- Since I have only been blogging since September of this year I took only a few photos of the teacher gifts.  I will share the building process of the one I made for myself.

scrap wood, crib parts

I cut down the crib and was left with some spindles (sorry no before of the actual crib, as you can see from the spindles it was pretty weathered).  I also grabbed some wood from my scrap pile.

If you know Gail, she loves the cull bin at Home Depot.  I do too now… thanks to Gail!  See beautiful long piece of wood?  It was from the Home Depot cull bin, not only was it straight and pretty, is it poplar, which is a nice hard wood.  I have had it for a while, just waiting to be used.  When you see wood this nice for 51 cents you HAVE to buy it…

cut spindle on miter saw

First, I cut my top piece,

crib rail

Then a middle piece,

scrap wood

I already had a scrap piece for the bottom, perfect size approx. 5in x 5in.  It can be really any size you want as long as it will be a base big enough that it won’t tip.

This board was a 1×8.  I cut it to 9 inches, this size can vary as well, just as long as it is not too big…

sanded wood

I sanded down all the pieces and took it inside for a dry fit….

diy memo stand

Looks good.  If it balances out then it will work.  Can you see the pencil line?  I first marked for 8 inches long, but decided to make it 9 inches instead.

gorilla glue

For the next step I grabbed some Gorilla Glue.  I had this on hand, but epoxy glue would work as well and dries faster.  (I guess I should confess, I have used hot glue on similar projects and they have held up just fine…)

gorilla glue

When you use this type of glue make sure to wet the wood first,

gorilla glue

Apply a small amount of glue, it expands as it dries.

Then Clamp.

I went ahead and did the top piece at the same time.

Since I couldn’t clamp it I used tape to keep it held together as the glue dries.  That way when the glue expands the pieces of wood will stay flush together.

Last, I glued the two pieces together and….”clamped” it.

Once it was dry, I put the tape back on the roll, I plan to reuse it.  I am cheap that way….

Next I spray painted it!  I used this black that I had on hand, but you could use any paint or spray paint.

When the paint dried I went down to my craft room and found some cute paper.  This is where you can really do anything…It would be a fun Christmas count down, with cute Holiday paper.  In the above picture I am showing how I mark the paper to know where to cut…I just use my fingernail and do a small indent on the paper.

Then I line the indented mark on the paper cutter and cut.  Call me lazy but this way I don’t have to worry about pencil marks and since it is only a straight line it works.  I did this on the bottom of the paper as well to get the bottom cut.

Next I used spray adhesive to attach the paper.  If you want it totally permanent, then you could just mod podge the paper on.  I might decide to change my paper someday, so the spray is a simple fix to do that.

To add a little extra cuteness, I nailed carpet tacks to each corner.  Just remember if you are using a hard wood, it might be nice to pre-drill tiny holes.  If you are using a soft wood like pine they will nail in super easy, no problem.

Here is a shot of some of the teacher gifts….I have six kids, but of course some kids had more than one teacher, like my middle schooler….I made 13 total….Insane, I know.  But is was so worth it to show my gratitude and appreciation!  Aren’t they cute?

Once I had the paper on, I flipped it over and painted on some homemade chalkboard paint.
I used this tutorial Here, and have been pleased with the result.  I did notice a few lumps from the grout, but I just smoothed them out with my finger or paint brush and they went away.  They best thing about homemade chalkboard paint is that you can do it ANY color you want!

When you paint it on, if you are worried about messing up the edges you can tape them….I am too lazy and was fine with just running the brush down the edge.

This is another shot of some teacher gifts, with one coat of chalkboard paint.  I did use black chalkboard paint on some, but this is where I first used the homemade chalkboard paint and most of them got it, I was so excited!

If you look in the back of the photo you can see I painted the glass for a large chalkboard at the same time, you can see that project Here.

I have a hard time doing just one project at a time…I might as well do another, since I had the paint out anyway…right?

Here is my message board three coats of chalkboard paint later…but I am not done yet!  I need a chalk holder…

 

I cut a small piece of moulding and spray painted it black…
Added some hot glue…
Stuck it on the chalk board and now I have the perfect chalk holder.
I had one more step, but I was undecided for a bit on this one.  I was trying to decide if I should use a clip, like I did on the teacher gifts, or a random metal strip I found in my garage.
I opted to use the random metal strip (I have no idea what it is…do you?)  and hot glued it on.
Done!
recipe holder
I love it!
It has been so fun to leave fun sayings for my kids, and they have enjoyed the chalk board too while I am getting dinner on.  I have also used it to hold several recipes while I cook.
repurposed crib parts scrap wood
That’s is it!  A super simple gift and useful too!  I hope you enjoyed this idea, maybe you can make one for a Christmas gift, or for your husband to put on his desk (with manly looking paper of course), or even for yourself.
I would love it if you came over and checked out my other projects!
Here are a few I have done…
Thanks for reading my guest post and thanks so much for having me Gail!  Have a wonderful day!
Mindi
Mindi—Of course I love these wonderful chalkboards and more.  They are so cute and useful, not to mention how much I love reusing parts like you did.  Smile  They would make awesome Christmas gifts for sure.   So happy to have you guest posting today!  Don’t be a stranger, k?
gail

See other great chalkboard ideas here:

Related Posts Plugin for WordPress, Blogger...
         
Gail Wilson is the hammer and drill behind My Repurposed Life. She is in the process of repurposing her life as she juggles all the responsibilities of running a home and a successful DIY blog. You can always count on Gail to give you the 411 on DIY on a budget.
About gail@myrepurposedlife.com

Comments

    Speak Your Mind

    *

  1. Very cool!

  2. Wow….great gifts for the teachers, Mindi!! Nice pictures…enjoyed each one of them.

  3. So nice, Mindi. Lucky teachers!!

  4. I am so excited for the guest post Mindi! You are awesome!

  5. Love this! How clever.

  6. Thank you so much Gail for letting me guest post today! You are Awesome!

  7. Holy Crow! Six kids and you find time for all of this? You make the rest of us look like slackers.

  8. Cute project!

  9. Great tutorial! Like this little project! And the repurposing of the spindles and parts.
    So so clever. :) Patricia

Thanks for sharing your thoughts with me! I read and appreciate every word!