I have a new repurposed furniture project to share with you today. It’s a hall table (sofa table) made out of a dresser. Do you remember last month when Mindi shared her blue dresser made into a bench? We were actually working on the same kind of project without even knowing it.
You know I love cutting up furniture. Although this one wasn’t really too hard, it was a little harder than I expected.
Here’s how it all started . . .
I picked up this $10 dresser at a yard sale last Fall. I didn’t really have a clue what I was going to do with it. Then last month I had an idea.
I felt like it wanted to be a table, but I didn’t want to build a base for it. I started by removing some of the drawers.
*This post contains affiliate links*
I LOVE what I do! There’s something about furniture demolition that is really fun!
I used my jigsaw to cut out each end of the dresser. Not the best execution of a design…. but it’s all good!
These were the pieces that fell to the ground as I was cutting.
To do this, I drew a line right on the edge of the support pieces, then drilled a hole in order to allow my blade to start the cut.
This is what I was left with.
I used a scrap piece of plywood to create a bottoms shelf.
There were definitely some veneer issues.
I mixed up some DIY chalky paint primer using some blue oops paint from Home Depot.
This was the strangest oops paint I have ever used. When I opened the can, the color (see the lid) did NOT resemble the fingerprint on the lid. This can was very full, and I had a difficult time stirring it. You’ll see the messy can in the picture below.
EDITED TO ADD: On the top of the can, it says the name of this color is Dark Denim.
I had to stir, and stir, and stir to get the pigments to blend to make the correct color. Oops! I made a huge mess! But I finally got rid of the really bright blue paint, and got the prettiest blue ever!
I gave everything a light sanding and prepared to paint the piece with my Homeright Finish Max.
Using the Plaster of Paint mixture as a primer, I did two light coats of blue. I also did a primer coat of blue on a cabinet door that I was making into a But First. Coffee sign.
I prefer to patch my pieces after the primer coat, so I can see exactly what is really showing up. I did two coats of spackle, sanding in between.
Then we had a couple of snow storms and this project was waiting patiently to be finished. Over the weekend, we had some pretty weather, and in between working on the DIY picket fence arbor, I was able to put two coats of paint on the dresser hall table.
I prefer to paint the underneath side of my pieces—for a more finished look.
TIP: to get the best coverage on the top of a dresser or table, lay the piece down so you’re spraying vertically instead of horizontally.
This is after 2 coats of the chalky paint primer.
I was considering these great handles, but they were too big. for the small sections.
I know the drawers are in wrong here, but this is the way they fit best.
To get a nice smooth surface, I like to use some brown craft paper to sand the surface before spraying the top coat of paint.
Pretty Handy Girl loves this project!
I added some pulls I purchased from my friends at D. Lawless Hardware .
I would love it if you would PIN this!
After seeing how Mindi painted the outside of her drawers, I decided to try it with this project. I typically don’t like to do this because the drawers tend to stick. I only did one light coat of the chalky paint on the sides of each drawer.
This dresser is in the queue for projects, what would you like to see me do to it?
Get my FREE ebook 30 DIY Tips when you subscribe to get updates in your inbox. 🙂
Please choose a color: