Ballard Design inspired Drying Rack
As an Amazon Associate, I earn from qualifying purchases.
How to make a Ballard Design inspired Drying Rack out of crib parts.
This is theirs:
And here is mine:
I started out with a simple box shape. (note to self, I need to stop taking pictures on this horrible table!)
I got the perfect crib rail from Cathy. I have several crib rails, but they are spindles or rectangular shapes. I think those odd shapes may leave bumps in clothes dried on them. I cut the rail in half using my compound miter saw.
I added a bead board back. Gluing and nailing it in place.
I went to Walmart to get some Rustoleum Heirloom white, and they don’t stock it at my store. I picked up Krylon Ivory (I think it was ivory) I used 2 cans for the box and the rails. I then decided to go to Meijer and get Rustoleum Heirloom White. I bought it in spray and a quart. In this picture you can see, the left side is the Rustoleum Heirloom White and the right side is the Krylon. The Rustoleum Heirloom White in this picture is brushed on from the quart can. I like really good coverage on this bead board. Doesn’t the Rustoleum Heirloom White look so much better than the Krylon Ivory? Rustoleum is the ONLY way to go!
While looking for the Rutsoleum Heirloom White at Wally world, I found these magnets. See those little words Super Strong! Huge understatement! The cards of magnets hanging on the hook at the store were all stuck together! I had to peel them off their neighbors! When I opened the package, two of the magnets found each other, and I could hardly get them separated! I used two of the magnets along with two small washers.
The only fabric store I have near my house is Hancock. It’s not the best, but I can get some really good deals there. This spool of ribbon was 70% off.
It was rainy last week, so I had to work on this in the living room on a scrap piece of carpet. (to protect the drying rack and the hardwood floors) You know I am the repurpose queen, and I recycle anything I can. These hinges are off of some bifolding doors that I use for shutter projects.
I stapled the ribbon to this wooden “separator”. I then glued it with Liquid Nails to the inner top corner of the box. I used this “separator so that the rail (when shut) would be flush with the box.
By now, ya’ll know that I rarely use any of my projects in my own house. I would LOVE to have this, but I have absolutely NO place to put it. Sad, but true. So, I have it staged on a table. It is leaning slightly so that it won’t tip over. (it’s hard to not say “tump”, as I grew up saying it all the time)
Here, you can see that I stapled the ribbon to the rail so that it will extend out for drying. You can also see the separator.
I used E6000 to glue the washers and the magnets.
I believe that lightweight clothes would dry on this rack even with it closed. You’ll notice that my version has twice as many rungs as the small BD rack has.
This is with the rack closed. The ribbon just rests neatly behind the rail sides.
Side view, you can see that it is leaning so that it doesn’t tump (can’t help myself) over.
Side view closed. By the way, the magnets hold it shut very well, even with two thicknesses of the ribbon.
One last full sized view. I have been wanting to make one of these for so long. It just took a while to find the perfect crib rail. I still have half of it left! 🙂
gail
Check out my other repurposed crib projects here
Cool beans! I actually found an old antique one that I want to paint and hang, but the laundry room is at the end of my ‘to makeover’ list. :o)peace.
Brilliant!! Our HOA does not “allow” clothes lines, and I’ve seen the drying racks, but thought they wouldn’t hold jeans or anything like that. But..I bet the crib slats would!! I am going to try making one (or two) and hanging them on my fence. No one will see them because they won’t be above the fence line, and if someone asks…I’ll have them closes and say..clothesline? what clothesline? Thanks for the tutorial!!
Love it … crib rail to drying rack.
So cool! I just love this!
Stopped by from the Creative Cats link party. Thanks for sharing. Great idea!
That is so amazing!! Wow!! What a cool idea to use a crib rail!! Really really nice job!!
Wow! I am absolutely impressed with this! Yours looks better than Ballard’s. Well done.
wow, this is so impressive!
Awesome. I want to make one now and I can see by your great instructions that I can do it myself.
Love it
Thank you girlfriend
Becky
seriously – that is awesome!
This is amazing and functional! WOW! I have some old baby bed rails out in storage. I might have to try this! Thanks!
I book marked this so I could always find it. I’ve talked to my hubby about making a drying rack in the past but his question is always the same “What will you dry on it?” LOL
Thanks for linking to me!