Home » Repurposed Furniture » How to repair a headboard

How to repair a headboard

As an Amazon Associate, I earn from qualifying purchases.

Do you have a headboard with bad veneer? My nephew Jimmy dropped this off for me to repair and paint.

 Isn’t it a beautiful bed?

Excuse the blurry picture. It’s the only picture I have that shows how bad the veneer was warped.

Related content:

How to remove veneer

You can patch wood after removing veneer

How to Repair Veneer

The veneer was pulling away from the front and the back of this headboard.

Visit the My Repurposed Life Amazon Store to shop my favorite items.

If you want a good hold when you repair a headboard, I recommend the ever popular Gorilla Wood Glue .

Then, I used something very thin to spread the glue. If you look carefully, you’ll see how wavy the veneer is in both the front and the back. After I spread the glue I need to clamp it.

New Use for Painter’s Tape

My regular readers know I’m a huge fan of ScotchBlue Painter’s tape. I have found a brand new use for it! Look how I applied tape to two pieces of scrap lumber.

Clamp Headboard Veneer

I used those two pieces of taped boards to clamp the headboard. Applying just enough pressure to get a little ooze. Don’t apply so much pressure that you make ALL of the glue ooze out.

I used four clamps and let the glue set up.

You can see that this option is a lot better than using the same four clamps in random areas. It sandwiched the bad veneer really well.

When the glue had set up, I removed the clamps and “popped off” the scrap lumber. It did stick slightly to the bed, but not like it would have stuck if the ScotchBlue had not been used.

Clean Repaired Headboard

It’s the dead of winter but we had a pretty warm day, so I was able to work outside. After sanding the bed, I used some TSP to wash it down.

Repair a Headboard with Wood Putty

There were some cracks there on the top left, this is before I filled them with wood putty.

This is after I filled the cracks and sanded.

Paint Headboard White

It was warm enough for me to paint outdoors. This is after I sprayed some gray primer on the footboard. I have a new favorite sprayer   from Homeright.

I didn’t have much time to work, so I mostly concentrated on the spindle parts of the bed, because they are so hard to paint by hand.

The weather turned cold again, and I was painting by hand indoors with a fabulous Purdy paint brush! If you’ve never used one, you really should try it.

Here I am painting in my kitchen! The bed is mostly finished. Jimmy is having a hard time finding side rails. I think he’s going to try using a regular metal bed frame. His aunt gail has had side rails, but has repurposed them into other items.

gail

If you’re not using the headboard for the bed, you will love these ideas on how to repurpose headboards.

32 Comments

  1. Thanks for the info Gail! The headboard looks like new, what an easy fix! Metal side rails s/b easy to find at thrift stores.

  2. Another way to get the glue into smaller places is to use a straw and blew it into the crevices. It works wonders so you dont have to pull back the veneer.

  3. thanks for the tutorial and the pics..it looks great! I have my old childhood walnut dresser with some damage to a few drawers.I am going to use your method to repair and paint it!

  4. Thank you so much for responding and so quickly.I think I’ll practice on some end tables first before tackling the bed 🙁
    Hopefully, I’ll have some good pix to update you with soon.
    I’ll also send a note so you have my email address.
    Thank you for sharing.

  5. Hello Gail, Your work is wonderful. I’ve found a new blog to watch. I stumbled upon your blog via google because I am thinking of re-doing my bed (headboard, footboard and sides). I am a new DIYr and this will be the largest project I am embarking on. Can you tell me a few things, did you sand by hand or with an electric sander and did you use a paint the whole bed by hand?I am hoping to surprise my DH with a mini-makeover when he returns in a week. Thanks.

  6. This is a wonderful helpful post. I just bought an old buffet off Craigslist, and the veneer on top is wavy..I’m not sure how to fix it though since I have no way to clamp it.. Maybe I could stack something really heavy on top?
    The bed looks gorgeous, and I love your blog! happy to find you!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.