Large Rustic Clock
As an Amazon Associate, I earn from qualifying purchases.
It is not exactly the same, but it totally filled my need for a large rustic industrial clock, and it works! My kids were pretty amazed that it actually tells time, funny. ๐
I started with some wood that I had gotten from the cull bin at Home Depot years ago. (mine doesn’t have a cull bin anymore, boo!) It was 1/2 inch plywood that I had ripped down into 3 1/2 inch strips. I used some of this plywood for my plank wall in my master closet makeover. I decided to just use scrap barn wood for the back and glued and nailed all the plywood together. I later went back and screwed the boards on.
In the photo on the right I measured my circle. What is that I am measuring with you ask? It is PVC Lattice in white and it is 8 feet long just under 2 inches wide, and really bendy. Which is why it was perfect for my faux metal band. I didn’t cut it at all, which gives an idea of how big this clock is. Since it will be the outside of the clock, it made since to use it to trace my inner clock circle.
After cutting my circle with a jigsaw, sanding it, and adding a few more support boards, I was ready to make a clock!
I used my “natural stain” which is 0000 steel wool and vinegar in a jar that has sat for at least a day or two. Then to give it a little more “old wood look” I dry brushed on some white paint very faintly.
I set to work spray painting my “metal band” with Krylon dual superbond. I knew this would ensure I wouldn’t have any PVC lattice poking through my faux metal. Then I gave my lattice and carpet tacks a coat of oil rubbed bronze and then a light spritz of metallic silver. This was done from really far away it kind of gives it a hammered look but without the texture.
All this spray painting was done in 30 degree weather in my garage…I know, but it was sooo much faster to wait for the cold weather dry time rather than painting all these small pieces by hand. I kept my spray paint inside except when I was using it, and it worked like a charm.
I happened to have some small scraps of sheet metal around from another project and used it to make my roman numeral numbers. I cut them in strips with tin snips, each strip was 1/2 inch wide by 4 inches tall. I used a hammer on a board to flatten them out. Then I used the same spray paint method as above.
I did go to Hobby Lobby and purchase clock gear, and used a 40% off coupon. I also bought the big metal ring that is in the center of the clock at Hobby Lobby. The PVC lattice I got at Home Depot. Everything else I already had on hand so this clock was around $20 for me. Not bad for a Pottery Barn Knock Off!
In the photo on the right I am measuring the clock hands on the metal. I originally had them longer, which is how I wanted them, but my High Torque Movement wasn’t as “High Torque” as expected and I had to cut them down…
Here I am attaching them with hot glue to the original hands. Too bad I had to cut them, they looked way better longer. Oh well. Sorry for the blurry picture, when I get in project mode I forget to check if my photos are good.
I measured and marked the center, and also the placement for the metal ring. In the photo I am marking where the Roman Numerals need to go, by measuring every 30 degrees from the center. This is my least favorite part, because it needs to be pretty accurate, and that takes time, so I was happy to be done!
To attach my ring, I hammered in some nails to make holes and then added wire to hold it in place. I simply twisted the wires together in the back and it is nice and secure.
Then I added my carpet tacks for the hour markers.
I used a big nail to puncture the metal for my numerals and then used my smaller nails to hammer them onto the wood. This took a while, most went in easily, but the knots in the wood really gave me some trouble in several spots.
Last up was attaching my faux metal band. I used a nail gun to hold it in place and then used screws to secure it. I had to touch up where the nails went in, but that was easy. I filled them with wood filler, then just sprayed oil rubbed bronze onto some newspaper and quickly used a small paint brush to paint the holes.
So does it look like a metal band to you?
It is close enough for me! My husband said that he thought it was metal, which made me happy.
I have to be honest, this looks way better in person. Just sayin’.
It looks so small staged on my house, but it is approx. 32 inches tall and wide.
I can’t wait to get it hung up on the wall! Eeek!
I love it, even if the hands are smaller than planned. ๐ I guess I can’t get everything I want…
If you like knock off projects then come check out my Restoration Hardware Chalkboard and my Pottery Barn “It’s the Most Wonderful Time of the Year Sign”.
Happy Holidays!
Mindi
Sharing here:
see more of Mindi’s posts on MRL below:
[categorythumbnaillist 274]
I went shopping today. Found the PVC board at Loweโs with the doors. Had to ask to find it. Found the metal ring at Hobby Lobby by the wooden letters and other crafting things. Found a small piece of steel sheet metal at Loweโs too. Steel is cheaper than aluminum. Found small nails and carpet racks at Loweโs too. Went to our antique store that has salvaged wood for the wood base. Oh and the clock parts at hobby lobby. You might have to ask but everything is out there at Hobby Lobby and Loweโs. Canโt wait to get started.
Awesome Cathy! I’m so happy you’re on your way to making this fabulous clock. Please let me know when you get it done, I’d love to see it.
gail
I am so happy you found all the supplies Cathy! I would love to see pictures when you finish too! Best of luck! Hugs! Mindi
HI – love your site!! Do you need different sized clock parts, depending on the actual size of the clock? Like one this big as compared to one that is, say, 1 foot across. I have tried googling the questions but am not getting good information! Thank you!
Question about the spray painting, can you be more specific with what you did for the band versus all the other parts of the clock? Confused if the numerals are just silver or a mix.
Thanks!
Hi Nicole! Great question, I used oil rubbed bronze spray paint on both. For the band I completely covered it with the spray paint, for the numerals I sprayed from far away with the spray paint can, enough to almost cover them. I liked the speckled look it gives to see some of the silver…but that is just personal preference. I hope that helps!
Please share what the numbers are made of and where you got them.
Hello, I’m wondering what type of nails you used to nail in the roman numerals? They look very small. Thank you.
Stephanie,
I think they’re called “wire nails”, you can probably find them near the picture hanging supplies at your local hardware store.
gail
Yep Gail got it right, I used “wire nails”!
Easier way to mark where the numbers go is to put the movement in and set it to 12 and the move the minute hand around an hour and mark the hour hand at 1, then move the minute hand and mark 2, and continue on for the remaining hours.
Wow! Just saying…… WOW!
I love this clock!! would you ever make them and sell them? I am not sure I am this crafty but love it!! ๐
I went to Lowes this evening and found the peice for the outside band. It was in with the interior resin moldings (resin chair rail, etc.) Hope this helps someone. Cheers ya’ll!
Just wanted to add that I also found this white lattice piece (outside band of clock) at Lowe’s just this week in case anyone is looking. ๐
Thanks for posting!! I was wondering where to get that!!! For the inner band too?
Still on this PVC thing…I looked on Home Depot website and all i find in lattice is end cap and divider and those are only 48 in and are not flat…Anyone find this?
Hi Kathy, sorry you have been having a hard time finding this, it is difficult to find. Here is the link to what I bought at Home Depot. http://www.homedepot.com/p/Royal-Mouldings-6510-1-4-in-x-1-3-4-in-x-8-ft-PVC-Composite-White-Lattice-Moulding-0651008005/202089995
I did, I found one less than 2″ wide and 8′ long. hmmmm…. maybe is different in every HD. Good luck Kathy, don’t give up.
http://www.homedepot.com/p/Royal-Mouldings-6510-1-4-in-x-1-3-4-in-x-8-ft-PVC-Composite-White-Lattice-Moulding-0651008005/202089995?cm_mmc=Shopping%7CTHD%7CG%7C0%7CG-BASE-PLA-D30-Moulding%7C&gclid=CIe_me7VnM4CFYmBfgodb7gCQg&gclsrc=aw.ds
6510 1/4 in. x 1-3/4 in. x 8 ft. PVC Composite White Lattice Moulding
I found it at Lowes with the RESIN moldings (resin chai rail, etc.).
This pvc lattice is a mystery to all the home depot employees…we looked at every piece of plastic type 8 ft pieces and did not find what you used…maybe a close up of the piece would help or a sku number…Really cannot find this stuff…please help
Thanks
I have found that pvc lattice before. I used it as baseboard in a wet space. I believe i found it with the non-wood baseboard molding “Lumber”. I remember being surprised that it was called lattice board.
I’ve had trouble finding it at my Home Depot too. ๐ Why do they have to “hide” good stuff!
gail
Model # 0651008005 Internet # 202089995 Store SKU # 843640
Hope this work if you still looking.
Oh my goodness! Thank you so much for sharing this. Our 5th anniversary is coming up and I wanted to make my husband something out of wood that we could share in our new home. This went perfectly with the wine bottle vases and cork candles I had already finished to decorate the mantle. I wish I could post a picture of my results here because (if I do say so myself) it’s FABULOUS! THANK YOU!