Painting a Ceiling Fan
As an Amazon Associate, I earn from qualifying purchases.
As most of you know, I’ve been working on my bedroom. It is a very large room, being that it was originally two bedrooms. Because there were two rooms, there were two ceiling fixtures. The ceiling fans have been in there for years!
This is the ceiling fan that is used most for lighting. The closet does not have any light fixtures. With the globe attached there is not much light given off. I removed the globe many years ago, hence that lovely cfl bulb.
This is the ceiling fan on the other side of the room, with the original globe. I know you would all LOVE to get your hands on that puppy! Look at that tassel! The wooden ball operates the fan, and the beautiful tassel operates the light fixture.
I did not want to replace two ceiling fans, due to the cost and the actual installation. I have seen people painting ceiling fans all over blogland. Some people even left them installed. I opted for taking mine apart before painting.
One can’t have black screws on a white fan now can one?
Perhaps not the best way to spray paint the machine screws, but hey, it worked for me.
I turned the ceiling fan blades/paddles over to their smooth side. I chose to paint them all as one part, rather than painting the wooden parts separate from their brackets.
I of course cut off the electricity to the room while I uninstalled the light kit. After taking all the parts down, there was that one part that was not easily removable, but yet needed to be painted white. I used the semi-gloss that I used on the windows to paint that part. I also took advantage of having all the ceiling fan down to paint the ceiling!
close up (note the trim has not been done yet) 🙂
I reinstalled all the pieces. I did not want to use the original globe. duh! I went shopping for a new globe. I was unable to find anything to fit except for a big white ball, which to me resembled a porch light. NO WAY! So then I looked into a new light kit, hmmmm $50.00 each! Not happening!
Oh yeah, I’m needing a new pull chain for the light kit. NOT putting that tassel back up there.
Meanwhile I start looking all around the house, bringing every lamp shade I have in there to see if it will work. Only one shade would hang correctly. This shade has the little piece that fits directly over the light bulb. It’s not too bad, but I only have one.
I went to Lowes with that shade in tow to buy some shades and new pull chains. I decided to keep the wooden ones and got two oblong looking bulbs for the other chain. (Light kit) I hung them on the clothes line to spray paint them. I had already painted the chains on the wooden ones, so I didn’t want the new golden chains. I wanted them to be white also.
Here are the new chains, and the new lamp shade installed. The shades I got at Lowes had the claw thingy that fits over the bulb, however you can see that the shade is turned the right way, but yet upside down. In other words the claw thing would not grab onto the light bulb. I cut the metal claw thing, but left the four little pieces of metal to help attach the shade to the existing light kit.
See that little piece with all the little holes in it? The little prongs that I left when I cut the claw thing off sort of clip right into those holes.
Here is the before and after! It’s still not the most beautiful ceiling fixture, however I love having ceiling fans. I am pleased with the overall transformation. Well worth the effort.
Check back tomorrow for an update on the bead board/tongue and groove wall.
gail
Pin It
ps don’t forget to check out the updating old wood trim post. 
and the headboard update here: 
and painting knotty pine here: 
I appreciate you reading my blog in your reader and/or via email.
You can reach me at gail@MyRepurposedLife.net
that looks great! i should paint mine. i woul dlove to have a chandelier or something prettier, but alas, we need ceiling fans, too. if only it didn’t get so darn hot.
that looks great! i should paint mine. i woul dlove to have a chandelier or something prettier, but alas, we need ceiling fans, too. if only it didn’t get so darn hot.
that looks great! i should paint mine. i woul dlove to have a chandelier or something prettier, but alas, we need ceiling fans, too. if only it didn’t get so darn hot.
I love the fan. Very creative. Ceiling fans are a necessary evil in the South.
I love the fan. Very creative. Ceiling fans are a necessary evil in the South.
Loving the after!!
XO
Lenore
Wow! you are one busy lady! Wht a great redo! The fans look like totally different fans. Great job!
it looks sooo great!
Love the way your ceiling fan turned out great way to deal with the globe problem, are you able to use a cfl blub with the new shade, it looks like you can? If I take the fan down in my living room wanna come and put the second coat on the ceiling? Just kidding, but still need to do that, the first coat got put on 3 years ago that’s how much I love painting.
The ceiling fan looks great. I like the old globe too but not for a fan globe. lol You’re putting in so much work on that bedroom. Can’t wait to see it when it’s all done.
You are an amazing woman!! I think I’m going to direct my husband to your blog to see how much you get done!!
Now that was a clever idea… Love the shade opposed to the globe…
I have the fans in a few rooms and I do not like them at all but they are a necessary evil.
Another great job Gail…
Hugs, Deb