Shutters Repurposed into Bookshelf
As an Amazon Associate, I earn from qualifying purchases.
This repurposed shutters project was custom-made for a friend. Jan picked up these vintage shutters at our local Habitat for Humanity ReStore for $5.00 a PAIR. That is not typical of our ReStore.
Vintage shutters repurposed into an awesome bookshelf or bookcase. Who doesn’t love a great shutter upcycle?
These are very nice, large, sturdy shutters.
Designing the repurposed shutter shelf
I had to rip a “ridge” off each shutter on the table saw to get them to fit together.
Connecting shutters using pocket hole joinery
I removed the black hinges and latches from the shutters. I used my Kreg Jig® R3 to make pocket holes to butt these two together in the back. Those pocket holes give a great (tight) joint. In case you don’t know what the Kreg Jig Jr. looks like:
I also used the pocket holes to attach the sides to the back using pocket hole screws.
When I build, I rarely have a plan. I just sort of jump in. After I got the four shutters together, I realized I needed pocket holes to attach the top. That’s where the portability of this jig comes in handy.
Even a warped top is no match for pocket hole screws
The rough-sawn lumber was a little uneven. Do you see the pocket holes? And the gap in the wood?
This is how it looked in the back.
Voila! Screws are in, and they pulled the top right down.
A quick clamp comes in handy when you work alone.
The shutter shelf comprises three 1x6s butted together with pocket holes to make three boards into one shelf. I found a new way to use my quick clamps. It can be pretty challenging building alone. I could use an extra pair of hands sometimes.
I made sure the shelf was level. The clamps were convenient to help hold the shelf in place. While the clamps held the shelf in place, I screwed the shelves to the shutters using pocket holes I drilled into the ends of each shelf. (If you don’t have a Kreg Jig, you can use cleats to hold your shelves.)
How to attach shelves to repurposed shutters bookcase
In this picture, you can see the pocket hole that put the boards together, and in the back left corner, you can see that I used a double hole to attach the shelf to the back of the shutter.
In this picture, I am getting ready to install the bottom shelf. I used this Combination Square to make sure the shelf was the exact measurement all the way around. This is one of the handiest tools I have.
Fill visible pocket holes before painting.
I filled all the (pocket) holes with spackling. The shelves are attached on the left front/back, middle, right back/front. The middle shelf is attached all around because the shutter is solid in the middle.
Add trim molding to the top of the bookcase.
Here, you can see what I mean. Without the pocket holes, I would have had to make “cleats” to run around the bottom of all the shelves to “rest” on. I installed crown molding on the top.
Then, I sanded all the patching and prepared the bookshelf for painting. I used a paint sprayer. You will love using a Finish Max paint sprayer.
Blue Bookcase made from Upcycled Shutters
After many coats of paint.
Related Content: Navy Blue Furniture Projects
Jan chose a blue from Behr; I believe it’s called Velvet Evening. Maybe you want to see Jan’s other project, the door nightstand/bookshelf.
See other Shutter Projects on My Repurposed Life
Beautiful shelf! We bought the Kreg jig to use when the hubby and I were building our kitchen cabinets and doors – it’s now a staple tool that we use VERY frequently around here. I would love to see some helpful hints on how you get your crown moulding cut and fit so well – something I have never managed to get quite right on my own.
You’re a genious. When is YOUR book coming out! Ideas AND skill. Marvelous. I love the way this turned out. Unfortunately I rarely see any shutters that are in any kind of condition to keep. Most around here are plastic.
Great bookcase!
I learn so much from you! Thanks for sharing.
It turned out beautiful!
It’s even better than I had pictured it. The blue looks great, though I bet it was awful to paint even with a sprayer. Shutters are so difficult.
Another way to join the 1x’s would be to use a biscuit joiner..something I DO have and don’t think of using enough. Though I still think I need a pocket hole jig too!
What a great bookshelf! And a nicely detailed tutorial too. Well done! … Do you have a paint sprayer recommendation?
What a great bookshelf! And a nicely detailed tutorial too. Well done! … Do you have a paint sprayer recommendation?
I love, love, love watching you do projects like this – though I still know I couldn’t put that together if someone held a gun to my head… maybe I think if I keep watching you making pocket holes and using the clamps as an extra person, I will suddenly know how to do it one day, LOL. (in my dreams, hehe) Great shelving unit – I adore it – you rock!
YOU are SOOOOOOOOO talented! I’m jealous!
Fabulous job! I am doing one of my features on your project this morning!DeniseExtreme Personal Measures
You make it look so easy! I know how difficult it is to put things like that together… sometimes 4 hands around here aren’t enough! I love things made from shutters. But that’s one thing I rarely see around here. Another great piece – it’s fabulous!
That is outstanding. I like the color don’t think I would be able to let her have it…I’d have to keep it. Trish
The shutter bookshelf looks great. I love the details you put into your work. It looks very professional. That color of blue is so pretty. I’m gonna have to find something to paint that color.