Shutters Repurposed into Bookshelf
As an Amazon Associate, I earn from qualifying purchases.
This repurposed shutters project was custom-made for a friend. Jan picked up these vintage shutters at our local Habitat for Humanity ReStore for $5.00 a PAIR. That is not typical of our ReStore.

Vintage shutters repurposed into an awesome bookshelf or bookcase. Who doesn’t love a great shutter upcycle?

These are very nice, large, sturdy shutters.
Designing the repurposed shutter shelf

I had to rip a “ridge” off each shutter on the table saw to get them to fit together.
Connecting shutters using pocket hole joinery

I removed the black hinges and latches from the shutters. I used my Kreg Jig® R3 to make pocket holes to butt these two together in the back. Those pocket holes give a great (tight) joint. In case you don’t know what the Kreg Jig Jr. looks like:

I also used the pocket holes to attach the sides to the back using pocket hole screws.


When I build, I rarely have a plan. I just sort of jump in. After I got the four shutters together, I realized I needed pocket holes to attach the top. That’s where the portability of this jig comes in handy.
Even a warped top is no match for pocket hole screws

The rough-sawn lumber was a little uneven. Do you see the pocket holes? And the gap in the wood?

This is how it looked in the back.

Voila! Screws are in, and they pulled the top right down.
A quick clamp comes in handy when you work alone.

The shutter shelf comprises three 1x6s butted together with pocket holes to make three boards into one shelf. I found a new way to use my quick clamps. It can be pretty challenging building alone. I could use an extra pair of hands sometimes.

I made sure the shelf was level. The clamps were convenient to help hold the shelf in place. While the clamps held the shelf in place, I screwed the shelves to the shutters using pocket holes I drilled into the ends of each shelf. (If you don’t have a Kreg Jig, you can use cleats to hold your shelves.)
How to attach shelves to repurposed shutters bookcase

In this picture, you can see the pocket hole that put the boards together, and in the back left corner, you can see that I used a double hole to attach the shelf to the back of the shutter.

In this picture, I am getting ready to install the bottom shelf. I used this Combination Square to make sure the shelf was the exact measurement all the way around. This is one of the handiest tools I have.
Fill visible pocket holes before painting.

I filled all the (pocket) holes with spackling. The shelves are attached on the left front/back, middle, right back/front. The middle shelf is attached all around because the shutter is solid in the middle.
Add trim molding to the top of the bookcase.

Here, you can see what I mean. Without the pocket holes, I would have had to make “cleats” to run around the bottom of all the shelves to “rest” on. I installed crown molding on the top.

Then, I sanded all the patching and prepared the bookshelf for painting. I used a paint sprayer. You will love using a Finish Max paint sprayer.
Blue Bookcase made from Upcycled Shutters

After many coats of paint.

Related Content: Navy Blue Furniture Projects

Jan chose a blue from Behr; I believe it’s called Velvet Evening. Maybe you want to see Jan’s other project, the door nightstand/bookshelf.
See other Shutter Projects on My Repurposed Life
I can use a hammer to hit something and that is the only tool i can use LOL
I am amaized that all these women out in blog land can do tools
Janice
That looks great! I’m so impressed with how you can see “what could be” in stuff a lot of people would view as junk.
Also–you’ll be proud. I finally bought a drill over the weekend. My first power tool!
Great tutorial! Your posts are always so relevant to me. I really appreciate the details that you share. We all learn from each other! Thanks!
Lesley
thehomelessfinch.blogspot.com
Great job Gail! It turned out great! I love my Kreg pocket hole jig too. But I also use a biscuit joiner and I love that too! It just depends on the application.
Great tutorial!
Holly
Beautiful! Gail, you are very talented, and have me itching to try my hand at some creative woodworking this summer.
Jenn
Great shelfing Gail, I just may employ your use of shutters here. I picked up a few this past weekend and I have need of shelving on the deck. I’ll be sure to let you know what happens. Do you make housecalls? *wink*
Kristy @ 4 the love of WOOD
Gail~
Wow! you did a great job on this project. So glad you showed us how you do it. Don’t you just love those clamps? We’ve been using ours when working on the tin-can.
I would just imagine the sprayer was a tremendous help in get that shelf painted. Love the color and how it turned out.
Pat
OMG! I love it! I just made a shutter bookshelf too but using a concrete form in the middle:-)
Once again I am in awe Gail! That shelf (but in creamy white maybe) would be awesome for my living room!
Another AMAZING creation! I have been looking (at Re-store, in fact) for some used shutters to make a headboard. No luck yet, but I will keep looking!
You sound like you are truly “in love” with your paint sprayer. I have seen some that are recommended but they have all been about $1000, yikes. I don’t suppose yours is a little more affordable?
You aced another one Gail. I love anything made from shutters and Jan sure hit the mother load getting them so cheap. You did a fantastic job on that. Love that little jig too… I hardly do a project without it.
Our Re store is so expensive, I can buy things new sometimes cheaper than I can buy them there.
Hope you are having a great week.
Hugs, Deb
I am in awe of your building talent. Your latest project is a wonder, and I LOVE the fun color!